Product Decription----------------------------------------------------------------------------------
Stainless steel strip are the most common and economical stainless alloys on the market. They are non-heat treatable alloys, which makes them perfect for tool wrap applications when heat treating parts. It is extremely resistant to corrosion, and heat oxidation, for applications up to approximately 1500 degrees Fahrenheit. They are non-magnetic in the annealed condition.
Cold Rolled Sheet: Cold Rolled steel sheets are going to be the most refined versions. They will have a thinner presence while still being just as durable and we have plenty of finishes that can be applied to stainless sheets. Stainless sheets can even be buffed to a mirror shine for the resilience of plate but with the appearance of a mirror.
300 Series stainless steels are classified as austenitic, and are hardenable only by cold working methods. These grades of stainless have chromium (approx. 18 to 30%) and nickel (approx. 6 to 20%) as their major alloying additions. 300 Series Stainless steel alloys resist corrosion, maintain their strength at high temperatures and are easy to maintain.
Material: 316L
Thickness: 0.3-6mm
Width: 1000-2000mm
Length: according to customer's request
Surface: 2B, Hairline, No.4, BA, 8K mirror finish
SUS316L Mechanical properties in the annealed condition
| Thickness(mm) |
Width(mm) |
Hardness(HV) |
Tensile Strength(mpa) |
Yield Strength(mpa) |
| 0.05-1.5 |
<500 |
>200 |
>520 |
>205 |
Chemical composition---------------------------------------------------------------------------------
| Main Ingredient |
Ni |
Cr |
Mn |
C |
| Reference No. |
10.00/14.00 |
16.00/18.00 |
≤2.0 |
≤0.08 |
316L stainless steel common material list
| Item |
XRX-SUS316L-S |
XRX-SUS316L-1/4H |
XRX-SUS316L-1/2H |
XRX-SUS316L-3/4H |
XRX-SUS316L-H |
| Hardness |
160-200 |
201-250 |
251-310 |
311-370 |
371-410 |
| Hardness Code |
S |
1/4H |
1/2H |
3/4H |
H |
| Thickness |
Common thichness:0.1/0.12/0.15......1.5(Irregular thickness can be customized) |
| Surface |
2B,2D,No.3,DF,BA,8K |
316L ultar thin, super-hard material list
| Item |
Hardness |
Hardness Code |
Thickness |
| XRX-SUS316L-H |
371-410 |
H |
0.08…0.03(Ultar thin) |
Chemical composition---------------------------------------------------------------------------------
| Grade |
C(Max) |
Mn(Max) |
P(Max) |
S(Max) |
Si(Max) |
Cr |
Ni |
Mo |
N(Max) |
Cu/Others |
| 304 |
0.08 |
2.00 |
0.045 |
0.030 |
1.000 |
18.00-20.00 |
8.00-10.50 |
- |
0.10 |
- |
| 304L |
0.030 |
2.00 |
0.045 |
0.030 |
1.000 |
18.00-20.00 |
8.00-12.00 |
- |
0.10 |
- |
| 310S |
0.08 |
2.00 |
0.045 |
0.030 |
1.500 |
24.00-26.00 |
19.00-22.00 |
- |
- |
- |
| 316 |
0.080 |
2.00 |
0.045 |
0.030 |
1.000 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
| 316L |
0.030 |
2.00 |
0.045 |
0.030 |
1.000 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
0.10 |
- |
| 409 |
0.08 |
1.00 |
0.040 |
0.010 |
1.000 |
10.50-11.75 |
0.50 |
- |
- |
Ti=6x(C+N) |
| 430 |
0.12 |
1.00 |
0.040 |
0.030 |
1.000 |
16.00-18.00 |
0.75 |
- |
- |
- |
Stainless steel maintenance
1. Regular cleaning and maintenance.
2. Pay attention to prevent the occurrence of the phenomenon of surface scratches.
3. Use soap, weak detergent or warm water to remove surface dust, dirt.
4. In addition to the surface of the binder with alcohol or an organic solvent (ether, benzene).
5. Use neutral detergent or ammonia solution in addition to surface oil.
6. With 10% nitric acid or abrasive detergent in addition to the surface of the embroider caused by the dirt.
Surface Finished-------------------------------------------------------------------------------------------
| Surface Finished |
Characteristics |
Application |
| BA |
Bright heat treatment after cold rolling. |
Ktchen utenstil, Kitchen ware, Architectural purpose. |
| 2B |
Finished by heat treatment, pickling after cold rolling, followed by skin pass line to more brighter and smooth surface. |
General application medical instruments, Tableware. |
| NO.1 |
Finished by hot-rolling, annealing and pickling, characterized by white pickled surface. |
Chemical industry equipment, Industrial tanks. |
| 8K(Mirror) |
A mirror-like reflective surface by polishing with finer abrasives over 800 mesh. |
Refletor, Mirror, Interior- Exterior decoration for building. |
| Hair Line |
Finished by continuous linear polishing. |
Architecture industries, Escalators, Kitchen ware, Vehicles. |
1. Online service for 24 hours.
2. Quick response.
3. Prompt delivery (We cherish time for each other.)
4. 24 hours after-sales service.(If you have any questions, please contact us by email . )
5. 100% responsible for the quality.
6. We will try our best to meet your requirements.
Packing&Shipping-----------------------------------------------------------------------------------
About us:
Xinrix Metal Material(Shenzhen)Co., Ltd was established in 2002, it located in Shenhen City, Guangdong Province, covers an area of 4000 square meters, has the authority for exporting & importing since 2002.
We focus on stainless steel coils and sheets CSP-SUS304 / SUS301 1/2H, 3/4H, H, EH and other ultra-thin super-hard material, thickness from 0.03mm to 1.5mm; CP-SUS304/SUS430/SUS420J2 2B/BA and SUS316L 2B, thickness from 0.15 to 3.0mm, including cold rolled steel and hot rolled steel in surface finish of No.3, 2B, BA, No.4,Mirror 8K, Hair Line, Scotch Brite, Color coated, Etched. All different kinds of hardness plate steel can be supplied according to clients' requirements, such as vertical cutting, punching, embossing, plating, frosting and other processing. Nickel strip, S/S wire mesh, wires and special steel strip are important parts in our business.
ISO 9001:2008 is implemented in our factory for quality control purpose and SGS certification to achieve the high performance meeting stainless steel industry standards of EN, JIS and ASTM. Most of our products are good selling to South East Asia. Sales volume is increasing year by year.
If you have any questions, please feel free let us know and we will provide professional solutions for you!
Contact: Miss. Lumi Huang
Mobilephone 0086-13647118171 |
Audited Supplier 
){kind=link}
){kind=link}